Plus, our partnership with Gorilla Axle gives this vehicle tires for the finest mud performance driven by the most power in its class. Last edited by hrc200x 02-08-2008 at 05:05 PM.2012 Can-Am Outlander 800R EFI X mr, Comes w/ EVERYTHING-Most Extreme ATV Made! - The Outlander X mr includes numerous mud-riding features that combine to create a more effective mud ATV such as adjustable-on-the-fly Air Control Suspension (ACS), Integrated Snorkel System (ISS) and more. Willing to sell your extra 200x motor yet? TORQUE: cam inspection hole cap 1.8-3.3 ft-lb
#1987 honda 200x install#
Install the timing and cam inspection hole caps and the valve adjuster cover.
#1987 honda 200x free#
Too much free play causes hard starting, too little freeplay may cause erratic engine idle and valve damage. 02-.06 inches)Īdjust by using the nuts by the kick start shaft on the cable. Measure the free play at the tip of the cam follower shaft arm (FREEPLAY. Make sure flywheel T is aligned with the index mark and is on the compression stroke.
#1987 honda 200x manual#
003 in which is the specified clearance.Īccording the the picture in the manual 1/2 graduation is the distance between the long and short tick mark, full graduation must be the distance between the two longest marks. Make sure adjusters don't move when you tighten lock boltsġ/2 graduation on the adjusters equals. Loosen the valve adjuster bolts fully, move the intake and exhaust valve adjusters counterclockwise fully until resistance is felt, then move them clockwise the eequivalent of 1/2 graduation, tighten the adjuster lock bolts (torque 7.2-10 ft-lb) When the T is aligned with the index mark and the timing mark on the cam is visible (facingup) the piston is at TDC on the compression stroke. If not visable turn the crank 360 degrees and realign the T mark. Remove the camshaft inspection hole cap from cyclinder head and make sure timing mark on the cam is visable (facing up).
Remove the timing caps on the left side cover, and align the T through the small hole with the index mark, remove the valve adjust cover located just above the spark plug.
0 kommentar(er)
